International WIN, Ltd.
340 North Mill Road • Suite 6
Kennett Square, PA 19348 USA
phone 610.444.0170
fax 610.444.0171


Each Flex-coil® Swivel System Run Rod is custom made to best fit your unique run design. To enable us to make the RUN ROD(s) you have ordered please complete the following questionnaire and Submit or FAX (610-444-0171) the completed form back to us as soon as possible. We cannot make the RUN ROD(s) until we receive the needed information from you.

Normally the RUN ROD(s) are mounted to the side walls of the run (assuming it is rectangular) about 5 feet above the floor. The RUN ROD(s) can be used in runs with vertical and horizontal bars, chain-link fence or solid walls of concrete, block or metal. We need to know in some detail what the run walls are like at about 5 feet above the floor of the run at about the mid-point from front to back.

Please insert the information below. All fields are required.

     
     
How many of each Run Rods are you ordering?
   Fluid Run Rods
A value is required. 		 Swivel Run Rods
QTY: A value is required.
What is the INSIDE WIDTH of the run in feet and inches?
  
A value is required. Feet    A value is required. Inches
What is the INSIDE LENGTH of the run in feet and inches?
  
A value is required. Feet    A value is required. Inches
A value is required.
What are the walls made of at about 5 feet above the run floor?
   Please select an item.
Are the walls the same on both sides?
  
      Please make a selection.
If No, please explain:
If the walls are made up of VERTICAL and/or HORIZONTAL BARS, what is the bar diameter?
  
A value is required. in inches (or partial inches in 1/8ths)
Are the BARS ROUND?
  
      Please make a selection.
If No, please explain:
Do the VERTICAL and HORIZONTAL bars create a recurring pattern?
        
Please make a selection.
What is the inside measurement of the pattern?
  
A value is required. inches wide  X   A value is required. inches high
Do you have other runs in which you would like to use the same RUN ROD?
  
A value is required.      
Please make a selection.
If using RON ROD on multiple runs, are they all about the same in size and construction?
  
      Please make a selection.
If No, please explain:
If we need to speak to someone familiar with your runs who should we contact?
  
Contact Name:
   A value is required.
Email address:
   A value is required.
Phone:
   A value is required.
Best time to call:
(AM or PM)
   A value is required.
Where do should we ship the finished Run Rods?
  
Doctor Name:
   A value is required.
Hospital:
   A value is required.
Email address:
   A value is required.
Phone:
   A value is required.
U.S. Mail Address:
   A value is required.
City:
   A value is required.
State:
   A value is required.
Zip Code:
   A value is required.